Reference Manual Instruction Manual

364

Set Command Library

Command Format Syntax

$PASHS,DIP,OFF[,c1][*cc]

Parameters

Examples

Terminating the current connection:

$PASHS,DIP,OFF*4B

Relevant Query

Command

$PASHQ,MDM

See also $PASHS,DIP

$PASHS,DIP,PAR

$PASHS,DIP,ON

DIP,ON: Establishing the Programmed Direct IP Connection

Function This command is used to establish the programmed Direct IP

connection.

Command Format Syntax

$PASHS,DIP,ON[,c1][*cc]

Parameter Description Range

IP port used for the connection to the server:

• E: Internal modem

• P: Ethernet stream 1

• Q: Ethernet stream 2

When c1 is omitted, the concerned port is

the one specified in the last $PASHS,DIP,

PAR or $PASHS,DIP command run.

E, P, Q

*cc Optional checksum *00-*FF