Reference Manual Instruction Manual

362
Set Command Library
DDN,SET: Sending the IP Address Manually to DynDNS
Function This command is used to force the receiver to send right away
its IP address to the DynDNS service. Typically this command
may be used when you have noticed that the ISP has just
changed the (public) IP address of the receiver. By default,
the IP address is sent to the DynDNS server every 10
minutes.
Command Format Syntax
$PASHS,DDN,SET[*cc]
Parameters
None.
Example
Sending immediately the IP address to the DynDNS service:
$PASHS,DDN,SET*55
Relevant Query
Commands
$PASHQ,DDN
$PASHQ,PAR
See Also $PASHS,DDN,PAR
$PASHS,ETH,PAR
DIP: Server Connection
Function This command is used to connect the receiver to a base via
the base’s IP address or host name.
Command Format Syntax
$PASHS,DIP,RIP,s1,PRT,d2[,LGN,s3,PWD,s4][,IPP,c5][*cc]