Reference Manual Instruction Manual

357
Set Command Library
CST,USR,ADD: Adding/Modifying NTRIP Caster Users
Function This command is used to add or modify a user allowed to
connect the embedded NTRIP caster. Up to 100 users may
be defined.
Command Format Syntax
$PASHS,CST,USR,ADD,s1,s2,s3[,s4,s5,s6,s7,s8,s9,s10,s11,s12,s13][*cc]
Parameters
Examples
Entering a user named “Ashtech” allowed to connect to all
the existing mount points managed by the embedded NTRIP
caster:
$PASHS,CST,USR,ADD,Ashtech,password,ALL*16
Modifying the “Ashtech” user so it is only allowed to use only
two of the existing mount points:
$PASHS,CST,USR,ADD,Ashtech,password,SEL,NAN1,NAN2*0E
Comments • If a user is created with no mount point associated to it,
then this user is allowed to connect to all existing mount
points.
• If a mount point is created with no user associated to it,
then the mount point is accessible to all users (not a
protected mount point).
Parameter Description Range Default
s1 Name of the new user (case sensitive).
32 characters
max.
-
s2 User password
32 characters
max.
-
s3
Indicator for user-authorized mount
points:
• ALL: all existing mount points can be
accessed by the user.
• SEL: Only the listed mount points
(see s4,...,s13 below) can be
accessed by the user.
ALL, SEL ALL
s4,...,s13
List of existing mount points the user is
allowed to connect to.
Mount point name 1, up to mount point
name 10
100 characters
max. (each)
-
*cc Optional checksum *00-*FF