Reference Manual Instruction Manual

314

Set Command Library

the receiver, the predefined parameters can be listed

using $PASHQ,ANP. New offset parameters can be added

using $PASHS,ANP,PCO.

• The predefined list complies with the IGS antenna source

table.

• The antenna name (and the optional serial number and

setup ID) are also inserted into the RTCM antenna

message when the receiver is used as a base.

Example

Entering “ASH111661” as the name of the receiver antenna

name and “201115864” as the receiver serial number:

$PASHS,ANP,OWN,ASH111661,201115864*36

Relevant Query

Commands

$PASHQ,ANP

$PASHQ,ANP,OWN