Reference Manual Instruction Manual

310

Set Command Library

ANH: Antenna Height

Function This command allows you to enter the antenna height

measured according to the vertical measurement technique.

Even if not specified explicitly, the height measurement type

will always be “Vertical”.

Command Format Syntax

$PASHS,ANH,f1[,c2][*cc]

Parameters

Example

Entering the vertical measurement (2 m) of a rover antenna:

$PASHS,ANH,2.000

Comments

When you enter an antenna height greater than 6.553 m, be

aware this will NOT be the value of antenna height broadcast

through RTCM messages and the one saved to the G-file.

Instead, a fixed value of 6.553 meters will be provided.

Relevant Query

Command

$PASHQ,ANH