Reference Manual Instruction Manual

306
Using Serial Commands
Memory &
Recording
GNSS Network
Set Command Description Query Command Description
$PASHS,DRD Data Recording Duration
$PASHQ,DRD Data Recording Duration
$PASHS,DRI Raw data recording rate $PASHQ,DRI Raw data recording rate
$PASHQ,EXM Extended internal memory status
$PASHS,EXM,OFF Disabling extended int. memory
$PASHS,EXM,ON Enabling extended int. memory
$PASHQ,FIL,CUR Info on G-file being recorded
$PASHS,FIL,D Deleting files
$PASHS,FIL,DEL Deleting files & directories
$PASHQ,FIL,LST Listing files in memory or USB key
$PASHQ,FLS List of raw data files
$PASHS,MEM Memory device used $PASHQ,MEM Memory device used
$PASHS,OCC Writing occupation data $PASHQ,OCC Occupation state and parameters
$PASHS,REC Raw data recording $PASHQ,REC Raw data recording
$PASHS,RFB Ring file buffer $PASHQ,RFB Ring file buffer
$PASHS,RFM Ring file memory $PASHQ,RFM Ring file memory
$PASHS,RFT Meteo/tilt data file type $PASHQ,RFT Meteo/tilt data file type
$PASHS,RXC,PAR Embedded RINEX Converter ($PASHQ,PAR,RXC) See $PASHQ,PAR.
$PASHS,RXC,RUN Convert G-files to RINEX
$PASHQ,SES Session programming
$PASHS,SES,AUT Setting sessions automatically
$PASHS,SES,DEL Deleting one or all sessions
$PASHS,SES,FTP,PAR Setting FTP server, file upload
$PASHS,SES,ON Starting sessions
$PASHS,SES,OFF Stopping sessions
$PASHS,SES,PAR Session recording parameters
$PASHS,SES,SET Setting one session manually
$PASHS,SIT Site name $PASHQ,SIT Site name
Set Command Description Query Command Description
$PASHQ,CST NTRIP caster parameters
$PASHS,CST,MTP,ADD Adding mount points
$PASHS,CST,MTP,DEL Deleting mount points
$PASHS,CST,OFF Turning off NTRIP caster
$PASHS,CST,ON Turning on NTRIP caster
$PASHS,CST,PAR Setting NTRIP caster
$PASHS,CST,RST NTRIP caster parameters
$PASHS,CST,USR,ADD Adding NTRIP caster users
$PASHS,CST,USR,DEL Deleting NTRIP caster users
$PASHS,DIP Server connection $PASHQ,DIP Direct IP parameters
$PASHS,DIP,OFF Terminating Direct IP connect.
$PASHS,DIP,ON Disabling Direct IP connection