Reference Manual Instruction Manual

303
Using Serial Commands
Ethernet
NMEA Output
Set Command Description Query Command Description
$PASHQ,DDN DynDNS parameters
$PASHS,DDN,PAR Setting DynDNS service
$PASHS,DDN,SET Sending IP address to DynDNS
$PASHS,DST
Connection modes for data
streams
$PASHQ,DST Connection modes for data streams
$PASHQ,DST,STS Data stream port status
$PASHQ,EFT Embedded FTP server
$PASHS,EFT,ON Starting embedded FTP server
$PASHS,EFT,OFF Stopping embedded FTP server
$PASHS,EFT,PAR Setting embedded FTP server
$PASHS,EFT,USR,ADD Adding embed. FTP server user
$PASHS,EFT,USR,DEL Deleting emb. FTP server user
$PASHQ,EML Email settings
$PASHS,EML,PAR Email parameters
$PASHS,EML,TST Testing email
$PASHS,ETH,OFF
$PASHS,ETH,ON
Controlling Ethernet port power
supply
$PASHS,ETH,PAR Ethernet parameters $PASHQ,ETH Ethernet status and parameters
$PASHQ,FTP FTP status and settings
$PASHS,FTP,OFF Ending FTP file transfer
$PASHS,FTP,PAR Setting FTP for file transfer
$PASHS,FTP,PUT Sending files to FTP server
$PASHS,TCP,PAR TCP/IP server settings $PASHQ,TCP TCP/IP server settings
$PASHS,TCP,UID TCP/IP authentication
$PASHQ,UPL FTP server settings (fw. upgrade)
$PASHQ,UPL,LOG Editing Firmware upgrade log file
$PASHQ,UPL,LST Listing firmware upgrades
$PASHS,UPL,PAR
Setting FTP server used for
firmware upgrades
$PASHS,UPL,UPG
Upgrading receiver firmware
from FTP server
$PASHQ,WEB
Web Server control, owner informa-
tion, connection profiles
$PASHS,WEB,OWN Receiver owner information
$PASHS,WEB,PAR
Web Server control and admin-
istrator profile
$PASHS,WEB,USR,
ADD
Adding user profiles for Web
Server
$PASHS,WEB,USR,
DEL
Deleting user profiles
Set Command Description Query Command Description
$PASHS,NME NMEA messages (ON/OFF) $PASHQ,NMO NMEA output settings