Reference Manual Instruction Manual

171

Web Server Help Files Collection

Data format:

Tiltmeter The Tiltmeter page is used to set the conditions in which the

receiver will communicate with and get information from the

tiltmeter.

For each serial port (A, B, F), the following parameters can be

set to allow a connection to the tiltmeter:

Interval

Set the time interval, in seconds, used

by the receiver to query the meteoro-

logical unit, if connected to this port.

MET

Parameter Designation $PASHS

“Legacy D-File

Support” check

box

Meteo data are part of the data saved in G-files.

If you check this option, they will also be saved

as separate D files (Ashtech legacy format).

RFT

Parameter Designation $PASHS

Process tiltmeter

Enable this option to allow the

receiver to query the tiltmeter, if con-

nected to this port.

TLT

Baud Rate Set the port baud rate PRT

Mode

Set the port mode (RS232 or RS422).

Only port A can be RS422 or RS232.

All the others are necessarily RS232.

MDP

RTS/CTS

Enable or disable the handshaking

protocol on this port.

CTS