Reference Manual Instruction Manual

100
Web Server Help Files Collection
• Clicking on the Status tab causes the connected receiver
to return its current status parameters.
• You may have to wait a few seconds before the receiver
can respond.
• Most of the pages on the Status tab are refreshed at least
every 10 seconds. On the Receiver Status & Settings page,
the data are refreshed every second.
• In each of the tables presented hereafter to describe the
receiver status parameters, the third column provides for
reference the relevant $PASHQ commands, that is the
query commands you could use alternatively to read the
current values of the described parameters.
Receiver Status &
Settings
The Receiver Status & Settings page provides six different
groups of information:
• Settings
• Antenna
• Heading (only if external heading mode activated)
• Computed Position
• Reference Position
• Differential Messages