Item Brochure

http://constructionpartners.trimble.com Page 3
Specifications
FEATURE SPECIFICATION
Beam Reception Range 360 degrees
Operating Range Over 460 m (1500 ft), radius laser dependent
Laser RPM Minimum: 105; Maximum: 1200
Vertical Reception 222 mm (8.75 in.)
Accuracy—On-Grade Deadbands
(Grading)
Setup: 5 mm (0.20 in.)
Fine: 10 mm (0.40 in.)
Standard: 20 mm (0.80 in.)
Wide: 40 mm (1.60 in.)
Accuracy— On-Grade Deadbands
(Excavation)
Setup 6 mm (0.25 in.)
Fine: 12 mm (0.50 in.)
Standard: 25 mm (1.0 in.)
Wide: 50 mm (2.0 in.)
ACE—Angle Compensation Mode Fine: 12 mm (1/2 in.)
Standard: 25 mm (1.0 in.)
Plumb Swing Range
Standard
Angle Compensation Mode
± 2.5°
± 10° to ± 30°
Display Output Bright, Dim, or Off
Power Options Alkaline—4 x "C" Cell—Standard
Nickel Metal Hydride—4 x "C" Cell
Power Cable—10 -30 V dc
Battery Life—Alkaline
(Continuous in beam)
75 hours, Display Dim
45 Hours, Display Bright
Battery Life—Ni-MH
(Continuous in beam)
50 hours, Display Dim
40 hours, Display Bright
Battery Recharge Time 3–4 hours
Automatic Shut Off 75 minutes with no laser beam
Out of Beam Indication High and Low
Remote Display Option Yes
Automatic Control Option Yes
Dimensions (LxWxD) 394 mm x 142 mm x 149 mm
(15.50 in. x 5.58 in. x 5.88 in.)
Mounting Pipe
Round Tube (Outside Diameter)
Square Tube
42 mm to 50 mm (1.66 in. to 2.00 in.)
38 mm (1.5 in.)
Operating Temperature -20 °C to +60 °C (-4 °F to 140 °F)
*Specifications subject to change without notice