Product Manual

6 GL700 Series Laser Transmitter Quick Reference Guide
Two-Way Radio Remote Control
(Radio equipped lasers only)
1 Power/Standby button (π) – turns the remote
control on/off and activates/deactivates
standby mode.
2 Manual button (
µ) – changes the laser from
automatic self-leveling to manual mode.
3 Mode button (
Μ) – allows you to choose the
laser’s operational mode, which includes
grade change, automatic axis alignment,
grade matching, PlaneLok, grade reverse,
and beam rotation speed.
4Up (
υ) and Down (δ) buttons –
increase/decrease the grade for the
1 and
2 axes and increase/decrease the laser
beam’s rotation speed. When the laser is in
manual mode, these buttons can also be
used to increase/decrease the slope of the
laser beam.
5 Left (
ν) and Right (σ) buttons –
increase/decrease the slope of the
2 axis
when the laser is in manual mode.
6 Liquid Crystal Display (LCD) – shows the
mode messages, beam’s rotation speed, and
percentage of grade.
7 Enter/Backlight button (
ε) – is a
multifunctional button that confirms the
selection made from the laser’s operational
mode and activates the backlighting function.
8 Antenna – transfers signals between the
radio remote control and laser.
9 Remote port contacts – transfers operation
and elevation information between the
remote control and the receiver.
MODE
1
2
6
5
4
3
4
5
7
8
9