Product Manual

GL700 Series Laser Transmitter Quick Reference Guide 19
Radio remote control
The radio remote control is a hand-held
device that allows you to send operational
commands to the laser from a remote
location. These operational commands
include changing grade values, rotation
speed, and operating modes. The radio
remote control HAS to be used for the
following advanced alignment features:
• Automatic axis alignment
• Grade reverse
• Grade matching
•PlaneLok
See your operator’s manual for detailed setup and operation of these advanced features.
A solid “T” symbol appears in the right corner of the LCD to indicate that the link
between the radio remote control and laser is complete. A flashing bar above the “T”
indicates that communication with the laser is established. When the radio remote
control is connected to a receiver, an “R” appears in the right corner of the radio
remote control’s first display line indicating that a connection has been made and the
power is on.
When using the radio remote control, make sure its antenna is pointing skyward. For
example, if you’re using the radio remote control in the horizontal position, such as you
would when holding the radio remote control in your hand, the antenna should be at a
90º angle to the radio remote control. If you’re using the radio remote control in the
vertical position, such as you would when connecting it to a grade rod, the antenna
should be sticking up from the top of the radio remote control.
MODE
Manual
Mode
Up
Left
Right
Down
Enter/
Backlight
Power/
Standby