Product Manual

GL700 Series Laser Transmitter Quick Reference Guide 17
Activating/deactivating manual mode
Manual mode bypasses the laser’s automatic self-leveling mode so you can use the laser
in vertical mode. Manual mode also allows you to tilt the laser beyond its built-in sloping
capability so you can perform steep-sloping horizontal applications.
Manual mode can also be activated/deactivated using the radio remote control. The
words “Manual Mode” appear in the LCD when manual mode is activated. For more
information about using the radio remote control, see the operator’s manual.
1. Make sure the laser is on and in the orientation appropriate for your application
needs (horizontal or vertical).
2. Press the manual mode button (
Μ).
Note – When manual mode is activated, the status LED flashes red once per second
and scrolling horizontal segments appear in the laser’s LCD.
3. To adjust the laser in the
1 axis so that the laser beam matches the desired slope or
grade, use the
1 axis up (υ) and down (δ) buttons on the laser or radio remote
control.
4. To adjust the laser in the
2 axis so that the laser beam matches the desired slope or
grade, use the
2 axis up (υ) and down (δ) buttons on the laser or the left (ν) and
right (
σ) buttons on the radio remote control.
5. To resume automatic self-leveling mode, press the manual button (
µ) on the laser
or radio remote control again.