Product Manual

7
Note: ThebubblesymbolsatthelaserandremotecontrolLCDwillashuntilthelaserhasbeenself-leveled
totherequestedgradeposition.
5.3.2 X-Y-grade entering – Step and Go mode
Howtochangeto‚StepandGo‘modeseechapter8.5
Quicklypressandreleasebutton2(Pic7)startsthegradeenteringmode.Bothgradevalueswillbeshown.
Press/releasebutton1 agradereverseY(Pic8)
Press/releasebutton2 agradereverseX(onlyGL622N)
Press/releasebutton3 a return to the standard display
Quicklypressandreleasebutton4toconrmtheselectedgradevalueand
return to the standard display
Press and hold button 6 or 7(left/right)tochangeX-axisgradevalue(onlyGL622N)afterthecomma;press
and hold buttons 6+7simultaneouslystartsX-axisquickchangemodewherethegradevalueinfrontofthe
commawillbesetto0%andthenstartschangingin1%increments.
Press and hold button 5 or 8 (up/down) for changingY -axis grade value; press and hold buttons 5 + 8
simultaneouslystartsY-axisquickchangemodewherethegradevalueinfrontofthecommawillbesetto
0%andthenstartschangingin1%increments.
Note: The speed of the grade value change increases with the amount of time the button is held down.
Note: Thegradevalueforbothaxesincreasesin1.00%increments.Whenthegradevalueforeitheraxis
reachesitshighestamount,thegradevalueswitchestothelowestvalueforthataxis.Forexample,thevalue
switchesfrom+25%to-25%.
Thelaserwillself-leveltotherequiredgradepositionafterconrmingthegradechangewithbutton4.
Note:Thebubblesymbolsatthelaser’sLCDwillashuntilthelaserhasbeenself-leveledtotherequested
grade position.
5.3.3 Rotation Mode
Repeatedly pressing the button 4togglesthrough300,600,750rpmregardlessiftheunitisin
automatic or manual mode.
5.3.4 Manual Mode
Pressing and releasing button 3attheStandardDisplayactivates/deactivates
the manual mode regardless if set up horizontal or vertical.
Manualmodeisindicatedbyhorizontallinesnexttotheaxessymbols.
Pic 6 Set Digit
Pic 7 Standard Display
Pic 8 Grade Reverse