Product Manual

13
Press and release button 4toconrmtheselection.Thecalibrationattheselectedaxisstartstheeldcalibration
procedure.
6.11 RC602N Service menu:
6.11.1 RF Connectivity
Press and release button 4 to get a status of the current Radio connectivity (Pic 33).
7 Special Features - Vertical Setup
7.1 Line Scan
Line Scan (Pic 34) centers the rotor horizontally and can be used to align the plumb beam to
adesiredhorizontalposition.PressandreleasetheMENUbuttonattheStandardDisplayand
select Line Scan. Pressing and releasing button 4 activates the Line Scan mode while the rotor
checksthelimitsoftheX-axisandstopsatthecenterposition.
Pressing button 3(ESC)stopsthemovementandchangestheunitintomanualmode.
Correctionsupanddowncanbedoneusingbutton5/8;forleft/rightcorrectionsusebutton6/7.
Press and release the manual button to change the unit back to full automatic mode.
8 Settings
PressandreleasetheMENUbuttonattheStandardDisplayandselectSettings(Pic35).
Press and release button 4toopentheSettingMenu;selectthedesiredfunctionthenpressbutton
4 to open the selected submenu function OR start the selected function.
TheSettingMenuoffersthefollowingfunctions:
Pic 30
CalibrationY
Pic 31
CalibrationX
Pic32
CalibrationZ
Pic 33 Radio
Connectivity
Pic 34
Line Scan
Pic35
Settings