Product Manual

9
NOTE
: Only Microsoft applications and messages will be
translated into languages other than English. All other error
messages, notifications and other applications may appear in
English.
7. Align screen
When the unit first turns on, the message ―Tap the screen to set up
your Windows Mobile-based device‖ will appear.
The align screen message will display a series of targets to tap in
sequence on the screen. Use the stylus to tap the targets firmly and
accurately. Sometimes you need to repeat the alignment procedure
more than once to provide a satisfactory alignment.
8. Location – time zone
Select your time zone location, set the time and date to the correct
values and tap Next.
9. Password – lock (optional)
You do not have to provide a password unless you are concerned
about unauthorized use. To eliminate using a password, tap Skip.
If you opt for password protection the password must be entered
every time the unit is turned on or the Power key is pressed to
resume operation.
WARNING: BE CERTAIN TO REMEMBER THE PASSWORD.
The only way to recover from a forgotten password is to perform a
Clean Boot and you will LOSE all application software, licenses,
settings and data on your unit. See page 17 on how to perform a
Clean Boot.
10. Using the expansion ports
To access the expansion ports, use the
Philips screwdriver end of the stylus or a
small #1 Philips head screwdriver to
rotate the two quarter-turn fasteners counter-clockwise and remove
the Expansion Cap.
Under the Expansion Cap is a Secure Digital (SD) expansion slot.
Depending upon the configuration of your unit, it may contain a