Product Manual

8
6. Language selection
The first time the unit is turned on or if the firmware is re-loaded,
you may need to select the desired language.
1. Use the up or down arrows to highlight the language desired
and press
Enter
to select it. (The touchscreen is not enabled
yet).
2. Use the up or down arrows to highlight the checkbox.
3. Press
Enter
to place a checkmark in the box for ―Yes‖.
4. Use the up or down arrows to highlight
NEXT
and press
Enter
.
5. Wait while your unit is being configured to the chosen
language. It will restart when finished.
IMPORTANT: Carefully choose the correct language because all
other languages are removed after this selection. Contact
technical support if the wrong language was selected.
NEXT
UP
DOWN
ENTER