Product Manual

52
Can I use my USB memory stick (or mouse, keyboard, cell phone
or other USB device) with my unit? Connecting peripheral
devices via USB requires the USB I/O Boot. Many USB devices
may work. Check with the device manufacturer to see if the device
is supported under Windows Mobile. Special drivers may need to
be installed.
Caring for your Unit
Case vent hole
:
A Gore-Tex membrane
is used at the vent hole to equalize the
atmospheric pressure within the unit and
to prevent dust, water, etc. from entering.
The vent must remain clear of any obstruction. Damage to the
touchscreen will occur if the vent is covered. Covering the vent with
stickers and labels may void the warranty.
Cleaning the unit:
Use a soft, dampened cloth with either water or
a diluted mild detergent. If a mild detergent is used, ensure all soap
residue is removed.
Do not use any chemical cleaners and do not
put the unit in the dishwasher.
Care of the touchscreen
:
Use only the included stylus or other
devices specifically designed for use with touchscreens.
DO NOT
use the metal screwdriver end of the stylus on the touchscreen or it
will scratch your screen. Only use the spring-tip end of the stylus.
The use of ballpoint pens, nails or other sharp objects to operate the
touchscreen will scratch and/or damage the unit. Keep the
touchscreen clean by gently wiping the display, using a soft,
dampened cloth with either clean water or glass cleaner.
Do not use abrasive cleaners directly on the display. Doing so may
void your warranty. Use the screen protectors included with the unit
to keep the touchscreen clean and protected, following the
instructions provided on the screen protector package.
Mechanical shock
:
The unit is designed to resist damage for drops
up to 4 ft (1.22 meters). However, you should protect the display
from impact, pressure, or abrasive substances that can scratch it or
crack it. The unit should not be dropped unnecessarily.
Vent
hole