Product Manual

48
9. Place the battery door over the battery, with the flat side of the
battery door at the top of the unit. Use the screwdriver end of
the stylus or screwdriver to gently tighten the four screws.
10. Replace the hand strap.
Setting up the cellular data connection
1. Tap
Start / Programs / CellStart
. Under
Available Data
Settings
, tap the
[+]
by your country to expand carriers.
2. Tap the
[+]
by the carrier you have signed up with and select
Typical
and tap
Add Settings
.
3. Ensure the phone is turned on and test the settings by opening
Internet Explorer and browsing to a web page.
4. Try other settings before calling the carrier technical support.
NOTE
: If you use multiple configuration settings, you can select
the primary by tapping the setting and tapping
Default
.
Removing cellular data settings
1. Tap
Start / Programs / CellStart
.
2. Tap
Refresh
to see the current list of configurations.
3. Select the configured data setting you wish to remove.
4. Tap
Remove
and
OK
.
NOTE
: After removing a default configuration, the top setting
will become the new default.
To access the detailed settings for each configuration, tap
Menu
/
Open Connections Applet
for the
Connections Settings
.
Customizing your phone
Tap Start / Settings / Phone.
Phone Number: The ring for text messaging notifications
can be changed. Tap Start / Settings / Sounds &
Notifications / Notifications and select Messaging: New
text message. Choose the sound you want.
PIN Number: a PIN can be set to block unauthorized
access to your data connection.
NOTE: This device is data-only and dialing controls are not
available. Under Services, voice calls to the Nomad can be
forwarded to another phone.