Product Manual

28
Working with the Camera
Depending upon the configuration of your unit, it may have an
integrated digital camera. If so, the protective cap on the top of the
unit will have a clear window.
Using the Camera:
1. Press the key to launch the Pictures & Videos application.
2. Tap on
Camera
.
3. Press the key to focus the image.
4. Press the
Enter
key to take a picture.
5. Press the
Enter
key to close the picture preview.
(Files are saved in
File Explorer
(under
My Device
)
/ My
Documents / My Pictures
.)
NOTE: The camera preserves battery power by going into standby
mode after 30 seconds of no camera usage. Tap the screen or press a
button to resume. The GPS will continue tracking satellites if
GeoTagging is turned on. Either ―Acquiring Satellites‖ or ―GPS
Ready‖ will be shown above the preview image when the
viewfinder is not in standby.
Managing Pictures:
Tap the desired picture to make it full screen. Tap Menu to see the
following features:
Zoom: A zoom window shows up in the lower right hand corner of
the display. You can zoom in, zoom out or return to normal
view (only on higher resolution pictures).
Play Slide Show: Tap the display to see the icons to pause, advance,
return to the last slide, or stop the slide show.
Set as Today Background: Tap to place the selected picture as the
background of the Today screen.
Beam Picture: For use to beam to another Bluetooth device.
Save: Saves the selected picture to a contact or a jpg.
Edit: Puts a selected picture into an editable mode. To rotate the
picture 90 degrees, tap the left application key Rotate.
Tap the right application key Menu to select the following:
- Crop:
Tap
Crop
and then drag the stylus on the screen to
select the area to be cropped.
- Auto Correct:
Automatically corrects the color in images.