Product Manual

24
3. Tap the name of the other Bluetooth device and tap Next. For
enhanced security, use passcodes. Enter the same passcode on
the other unit.
4. If desired, change the name of the other device and tap Finish.
Once a partnership has been created, the devices do not need to be
configured as visible any more.
Bluetooth connection with a PC
1. Ensure that your PC has connectivity software installed. See
Connecting to a PC on page 21.
2. Set up a partnership between your unit and the PC. Refer to
your PC documentation for instructions.
3. After a few moments, select the PC from the Device list.
4. Confirm that ActiveSync service is available and place a check
in the check box and tap Finish.
5. Tap Start / Programs / ActiveSync / Menu / Connect via
Bluetooth.
Bluetooth connection with a printer: If the printer is Bluetooth-
enabled via Bluetooth serial profile, it is possible to establish a
Bluetooth connection.
1. Set up a partnership between your unit and the printer. (If the
printer asks to connect to your unit, tap No.) Refer to your
printer documentation for instructions and to see if a passcode
is required.
2. After a few moments, select the printer from the Device list.
3. Confirm that serial port service is available and place a check in
the check box and tap Finish.
NOTE: Windows Mobile operating system does not support
printing without additional third-party software.
Bluetooth-enabled headphone: You can use a Bluetooth stereo
A2DP headphone only. Bluetooth handsfree audio devices that are
typically used with cell phones are not supported.
Troubleshooting Bluetooth connection problems: If your unit
cannot find another Bluetooth device, confirm that the device is
within range (less than 30 feet / 10 meters) and no large objects
obstruct the path of other Bluetooth-enabled devices. Confirm that
the device is turned on and has been configured to be discoverable.