Product Manual

20
Backlight for display and keypad
Tap System / Backlight. Change the settings as follows:
Display backlight: The default is on. Tap Battery Power,
External Power and Brightness tabs to change settings.
Keypad backlight: Make changes by tapping the Keypad
Battery, Keypad External or Keypad Brightness tabs.
Power
Tap System / Power to view the approximate battery power
remaining. Tap the Advanced tab and choose the settings for
automatically turning off the unit when not in use.
Tap System / Power / Calibration to see if calibration is
recommended. For more information on calibration, refer to page
14.
Memory
Tap System / Memory to see how much Storage memory (Flash)
and Program memory (RAM) is available. If there are external
cards installed, tap Storage Card to view the available memory on
the card. If there is more than one card installed, tap the dropdown
arrow to select the different cards.
Flash Settings
Tap System / Flash Settings. The Flashlight turns on automatically.
You can change the intensity of the Flashlight and the intensity of
the Flash used for the camera. To turn the Flashlight on and off,
push the left soft key.
Task Manager
Closing programs still leaves them resident in RAM. Windows
Mobile will close background programs to free up RAM if
resources are low. To manually close programs, tap Start /
Programs / Task Manager. Tap on the program and tap End Task
or tap Menu / End all Tasks.
System information
Tap System / System Information. Firmware version, serial
number, processor speed, RAM and Flash size, wireless
configurations, battery and card port information can be found here.