Product Manual

19
Settings on your Unit
Tap Start / Settings. Tap any of the icons on the Personal, System
or Connections tabs to customize the unit settings to your own
preferences. Tap OK to exit the settings. Some of the more useful
settings are described below.
Lock (password)
If you want password protection from unauthorized use of your
unit, tap Personal / Lock. The password must be entered every time
you turn the unit on or resume operation.
WARNING: BE CERTAIN TO REMEMBER THE PASSWORD.
The only way to recover from a forgotten password is to perform a
Clean Boot. However, you will LOSE all application software,
licenses, settings and data on your unit. For instructions on how to
perform a Clean Boot, see page 17.
Buttons (keys)
Tap Personal / Buttons. You can assign your favorite programs to
several of the keypad buttons. The list of assignable keys is shown
on the left hand side with the program that is assigned by default on
the right. To reassign a key, select the key you wish to change in
section 1 and choose the desired program or action from the pull-
down list in section 2. By default, the key will take you to the
Camera application and the Camera Focus. The left soft key is
assigned to the Flashlight, if the camera is present and the right soft
key is assigned to the laser scanner, if present.
On the numeric data keypads, the yellow function key (sticky
FN) accesses the tasks in yellow, including the Navigation arrows.
Several settings can be changed under Keyboard Options.
Auto release: Press and release the function key to access a
yellow task for one use. It then goes back to the keytop tasks.
Manual release: This is the default. Press the function key to
toggle it on and off. Yellow tasks remains active until the
function key is pressed again.
Disabled: The function key has to be held down while pressing
any other key to access the yellow task.
Play Sticky Key Sounds: To disable sticky key sounds, remove
the check in the box.