Product Manual
16
Speaker and microphone
Your unit comes with an integrated speaker and a microphone. It
also has an audio jack that is wired for a headset with a mono
speaker and microphone combination. It is not for stereo headsets.
To record, tap Start / Programs / Notes. If you do not see the
Recording toolbar, tap Menu / View Recording Toolbar. Tap the
round record symbol on the screen. The unit will record until Stop
is pressed. The recorded file will be saved in the Notes folder.
Power key features
The Power key turns the unit on and off and performs a number of
additional functions.
Turn backlight on/off:
To toggle the backlight on or off, hold down
the
Power
key for approximately 1 second. Once toggled off, the
backlight will stay off until it is toggled back on. Screen taps and
key presses will not cause it to turn on.
Power menu:
Hold down the
Power
key for about 3 seconds to
display a countdown. Continuing to press the
Power
key will cause
a reset when the countdown reaches zero. If you release the
Power
key while the countdown is proceeding, you access the following
menu. Tap an option or
OK
to exit.
Clean Screen: Disables the touchscreen for cleaning. Press the
enter key to re-enable the touchscreen.
Align Screen: Repeats the alignment procedure.
Replace Battery/SIM: Ensures that alarms will not wake up the
unit while changing the battery or the SIM on WWAN units.
Shutdown: Intended for long term storage to put the unit in its
lowest power mode. Running application state, unsaved data,
and real-time clock settings will be lost. Internal GPS
parameters will be reset to their default settings. To take the unit
out of the shutdown mode, press the power key and the unit will boot up. NOTE: While in
shutdown mode, the battery LED does not work, but if the power supply is plugged in, it
will still charge.
Reset: Stops all running programs and restarts the unit. No file system data is lost, only
open or unsaved files will be lost. All registry settings, control panel, personal information,
GPS settings and databases are preserved.
NOTE: if the countdown or the Power menu does not appear when the power button is
held down, continue to hold down the power button for at least 20 seconds to reset it.