Product Manual

10
CompactFlash (CF) type II slot, USB port, a camera and/or a scanner.
The scanner and camera units have a clear window in the cap.
Gently insert cards into the slot and
release; the card should catch in the slot.
Make sure the front of the card faces the
display side of the unit. Push the cards
in straight, never at an angle or forced.
To eject an SD card, gently press the top of the card to release it. To
eject a CF card, press the eject button next to the CF card.
There may be a foam bumper inside the expansion cap. When
present, SD cards will be retained in 900B and 900L units when
dropped within the product specification. On the LD unit, only USB
storage devices that are 1.75 inches long are supported in drop. USB
devices that are longer than 1.75 inches may reduce GPS
performance.
NOTE: DO NOT use the unit without reattaching the cap and the
boot. The unit is NOT sealed when the cap or boot is off and water
damage can occur, possibly voiding the warranty.
SD slot