Item Brochure
Included Pipe Laser Components Optional Pipe Laser Accessories
Self-Leveling
The DG813 and DG613(G) feature the largest automatic leveling range in the industry providing quick, easy setups,
regardless of grade. Unlike traditional pipe lasers, they eliminate the need for rough leveling and minimize crew training.
Simply set up the laser in the pipe, manhole or open cut without the need to swivel or rough level the unit.
Line Alert
This unique feature is ideal for working in high-vibration or wet conditions where the pipe lasers may be disturbed. The beam
ashes to notify you that the setup line has been disturbed, eliminating the necessity of rework. Combined with the self-leveling
warning, you’ll always complete the DG613(G)/DG813 job correctly, on time and on budget!
Line Set
The Line Set/Check capability of both pipe lasers allows you to raise the beam up to 100% outside of the trench for fast line
setup or checking. Raising the laser beam out of the trench to an above-ground stake saves you time—instead of having to
move the excavator off line during setup of the pipe laser, you can just get on with your job. In addition, the Line Set-Check
feature is ideal for rechecking the line for pipe jacking after each push.
Spot Finder SF803
This advanced tool detects manual and automatic beams of the Dialgrade DG813 Pipe Laser. Spot Align, Spot Match and
SpotLok are unique automatic features that make the DG813 the smartest pipe laser in the industry.
Target
Our patented Target Lens collects the beam and transfers the spot up to the pipe layer’s angle of view, making it very easy
to see the laser beam (inclusive in the standard package).
929 Blower
1244 T-Bar
956 / 956G Optically
Enhanced Target
Q104781 Charger
1017 Manhole
Mount
1230/1237
Metal Invert Plate
RC803 Remote
Q104667 Rechargeable
NiMH Pack, 10 Ah
936 Adjustable
Large Pipe Target
P25 Cable w/
Cigarette Lighter Plug
1239 Extended Height
Vertical Pole
1161 Heavy-Duty
Wood Tripod
1263 Sighting Scope
with Adapter
P24 Pole Adapter for
Spot Finder SF803
Spot Finder
SF803
(DG813)
1248 Trivet Plate
ST802
Transporter
(DG813)
DG613 / DG613G / DG813
New reduced length allows easy set-up even in tight inverts
Self levelling range of -12% to +40% over the entire grade range
Cross axis compensation provides a quicker more accurate set-up
as the laser does not have to be level in the pipe – place it in the
pipe it levels, you work.
Bright visible beam that works up to 150 m (500 ft)
RC803 remote works via radio 130 m (430 ft) or infra-red 150 m
(500 ft) for both “over-the-top” set-up and in pipe/trench set-up.
Large, bright, graphical user interface makes the screen easier
to see and use when in or out of the pipe. Same graphical user
interface can be seen on the remote – what you see on the laser
you see on the remote.
The DG613(G) has exible power options that provide
40 (30) hours operating time (NiMH rechargeable batteries with
worldwide charger). Alkaline batteries can be used directly in the
laser without a separate battery pack. Additional car charger can
be purchased to keep you working even when out in remote areas.
The Spectra Precision DG613(G) has advanced functions that
make setting up and using it easier and more accurate:
−
Line-Set/Check – allows the user to align the laser to the manhole
quickly and easily to set direction. The beam will go up to 100%
allowing easy alignment even in short trenches
−
Line Scan – provides a quick alignment to the center of the target
for the second day setup
−
Line Alert- noties the user if the set-up is disturbed eliminating
costly re-work from errors
Key Features and Benets
Installation of gravity ow sanitary pipelines
Storm sewer pipelines
Pipe jacking
Can be used in a pipe or in “Over the Top” set-ups
Applications
DG613 / DG613G
DIALGRADE
COMPACT AND POWERFUL
IR/Radio Remote
Included
Compensation
Temperature
Key Features and Benets
DG813 DIALGRADE
COMPACT, TOUGH AND
SMART – PERFECTION IN A PIPE
New reduced length allows easy set-up even in tight inverts
Self levelling range of -12% to +40% over the entire grade range
Cross axis compensation provides a quicker more accurate set-up
as the laser does not have to be level in the pipe – place it in the
pipe it levels, you work.
Bright visible beam that works up to 150 m (500 ft)
RC803 remote works via radio 130 m (430 ft) or infra-red 150 m
(500 ft) for both “Over the Top” set-up and in pipe/trench set-up.
Radio range is almost doubled with the use of Transporter ST802.
In addition ST802 enables radio connection between RC803 and
DG813/613 (G) also inside the open trench at the end of the pipe.
Large, bright, graphical user interface makes the screen easier
to see and use when in or out of the pipe. Same graphical user
interface can be seen on the remote – what you see on the laser
you see on the remote.
The DG813 has exible power options that provide 40 hours
operating time (NiMH rechargeable batteries with worldwide
charger). Alkaline batteries can be used directly in the laser
without a separate battery pack. Additional car charger can be
purchased to keep you working even when out in remote areas.
The Spectra Precision DG813 has advanced functions that make
setting up and using it easier and more accurate:
−
Line-Set/Check – allows the user to align the laser to the
manhole quickly and easily to set direction. The beam will go up
to 100% allowing easy alignment even in short trenches
−
Line Scan – provides a quick alignment to the center of the
target for the second day setup
−
Line Alert- noties the user if the set-up is disturbed eliminating
costly re-work from errors
The SF803 Spot Finder, when used with DG813, provides other
automatic functions making it the smartest pipe laser in the industry:
−
Spot Align – automatically aligns the DG813 to the center of the
Spot Finder in the pipe or to the direction of the manhole when
used in a deep, short trench or “Over the Top” set up.
−
Spot Match – a great tool for checking that pipe has been installed
to the correct grade or for nding the grade of existing pipe work.
Can also be used to calculate the grade between manholes.
−
SpotLok – can be used to easily establish a steep slope
reference or to lock the beam in a desired position for
applications such as solar farms where the beam could be
subject to drift.
−
Spot Search – can be used to manually locate the beam over
long distances out of the trench
SF803
Applications
Installation of gravity ow sanitary pipelines
Storm sewer pipelines
Pipe jacking
Tunnel boring
Can be used in a pipe or in “Over the Top” set-ups
Steep slope applications at mountain areas
Installation of solar farms
IR/Radio Remote
Included
Spot Finder
Compensation
Temperature
RC803
Ultra-Green
Model Accessory Power
DG613
Standard package with RC803 Remote Control,
956 Red Target, 1248 Trivet Plate (200 mm / 8 in)
(Additional package congurations available)
NiMH Recharge
DG613G
Standard package with RC803 Remote Control,
956G Green Target, 1248 Trivet Plate
(200 mm / 8 in)
NiMH Recharge
Model Accessory Power
DG813
Standard package with RC803 Remote Control,
SF803 Spot Finder, 956 Red Target,
1248 Trivet Plate (200 mm/8 in), ST802 Transporter
(Additional package congurations available)
NiMH Recharge
RC803