Product Manual

Keypad Functions
Selected settings are retained after power off
LEDs
Bright
LEDs
Dim
LEDs
OFF
(No symbol)
Beeper
Loud
Beeper
Medium
Beeper
Low
Power ON/OFF
Press both buttons repeatedly
to change LED brightness
LED Brightness
Accuracy
Beeper Volume
ON - 1 sec
OFF - 2 sec
Do not power up in a
laser beam
Unit is ready after
“CAL” disappears
Menu Functions
 Scroll Down
 Scroll Up
Menu activation
“Back” key
Menu Function Flow
Function Description
LGHT
OF

Backlight ON-OFF
▼
LGHT
OF
Backlight Off. Enter
LGHT
ON
Backlight On. Enter.
RDIO

Radio functions
▼
RDIO
LS
Connect with laser
RDIO
HL
Connect with another receiver for remote display
RDIO
OF
Communications Off
PAIR

Pair with selected device (Laser or Receiver)
PAIR
+
Pair with device now. Enter.
UNIT MM

Unit of Measure MM-CM-IN-FRAC-FT
MM Select Millimeter
FT Select Feet
FR Select Fractional Inches
IN Select Decimal Inches
CM Select Centimeter
SENS
MD

Sensitivity Medium-High-Low
Increased sensitity increases distance
Lower sensitivity improves strobe light rejection
▼
SENS
MD
Select Med sensitivity (recommended; default)
SENS
LO
Select Low sensitivity (to improve strobe light
rejection)
SENS
HI
Select High sensitivity to improve distance
FRC.R
ON

Fractional reduction ON-OFF
▼
FRC.R
ON
Turn on fraction reduction. Example reduce 4/8"
to 1/2"
FRC.R
OF
Turn off fractional reduction. Fraction
denomimator stays the same. Useful to check
ne surface atness.
DRFT
OF

Vertical mode drift alarm. Alerts you that laser
has moved
▼
DRFT
OF
Vertical drift alarm OFF
DRFT
ON
Vertical drift alarm ON
FPRT
ON

Fingerprint locks on to paired laser.
Other lasers are rejected.
▼
FPRT
ON
Fingerprint ON
FPRT
OF
Fingerprint OFF
Backlight
• Activate menu.
• Scroll to LGHT. Enter.
• Scroll to On or Off. Enter
Pair with Laser. This will enable laser
functions GradeMatch and PlanLok.
• Activate menu.
• Scroll to RDIO. Enter.
• Scroll to RDIO LS. Enter
• Scroll to PAIR. Enter and also press appropriate
buttons on laser (Manual and Power On)
Pair with another HL760 to be used as remote
• Activate menu.
• Scroll to RDIO. Enter.
• Scroll to RDIO HL. Enter
• Scroll to PAIR. Enter. And also perform same
function on the other HL.
• Power receiver Off.
• The rst receiver powered on is “laser receiver”.
The second displays “RMT.D okay” Press enter
to accept as remote display
Unit of Measure
• Activate menu.
• Scroll to UNIT
• Scroll to desired unit of measure. Enter
Sensitivity. Increased sensitivity – longer
distance. Decreased sensitivity – better strobe
light rejection.
• Activate menu.
• Scroll SENS. Enter.
• Scroll to desired sensitivity. Enter
Fractional inches reduction. Fraction
denomimator stays the same. May be useful to
check ne surface atness. Example converts
4/8 in to ½ in.
• Activate menu.
• Scroll to FRC.R. Enter
• Scroll to On or Off. Enter
Drift Alarm (when laser is in vertical orientation.
This results in no sound when aligned, but
beeper alarms when laser is disturbed)
• Activate menu.
• Scroll to DRFT. Enter.
• Scroll to On or Off. Enter
Fingerprint. CR700 will react only with paired
laser, rejecting other laser strikes
• Activate menu.
• Scroll to FRPT. Enter.
• Scroll to On or Off. Enter
Accuracy in mm:
0.5 1 2 5 10 25
1/32 1/16 1/8 1/4 1/2 1
Accuracy in frac. inch

Enter
Dispaly Status Symbols
Fingerprint enabled
30 minutes
Rod Clamp - Grade Rod Adjustment
Square rod
Round rod
Optional Vertical Adapter
Vertical Adapter PN 105516
Threads to mount on 5/8x11 or 1/4
inch tripod.