User Guide Network Adapter Spectra 12000

Chapter 7. Configuring the Spectra 12000 E-QIP 99
To verify connectivity, load a tape to the drive and use the mt or the tar
command. Use the
mtx command to verify communication with the
library.
You are now ready to install the backup package of your choice.
The following files are installed by adding the RPM:
/dev/TAOSitp
/etc/TAOSitp
/etc/TAOSitp/connect
/etc/TAOSitp/devices
/etc/TAOSitp/discover
/etc/rc.d/init.d/taos
/lib/modules/(running kernel version)/misc/TAOSitp.o
/usr/sbin/TAOSbusctl
/usr/sbin/TAOSdiscover
/usr/sbin/TAOScontrol