Product Manual

Juno T41
User Manual
46
Chapter 6 Using Additional Hardware
Features
6.1 Flashlight
The dual LEDs for the camera flash can also be used as a flashlight.
Tap > Flashlight to toggle the Flashlight on and off.
6.2 Assigning Buttons (hardware buttons)
Tap > Settings > Personal > Buttons. Under Program Buttons,
your favorite programs can be assigned to several of the device
buttons. The list of assignable buttons is shown on the left hand side
with the program that is assigned by default on the right. To reassign
a button, select the button in section 1 and change to the desired
program or action from the pull-down list in section 2.
You can customize the way your Up/Down control repeats by
changing the settings under the Up/Down Control tab.
CAUTION: Assigning a button to activate a program may disable the
use of that button for specific uses in other programs. For example, if
the ACTION button is assigned to open a specific program, it will no
longer trigger the camera application to capture an image.
6.3 Compass Calibration
To re-calibrate the compass, tap > Settings > System >
Compass Calibration. Follow the instructions on the screen.
1. Set the device on a level surface and tap Calibrate.
2. Wait 3 seconds and then turn the device around, spinning it on its
back without lifting or tilting the device. Complete at least a full
rotation in 10 seconds.
3. Repeat as necessary if the calibration fails.