Product Manual

Juno T41
User Manual
48
Bluetooth device works. Refer to all device documentation.
1. Tap > Settings > Bluetooth > Mode. Ensure that both
devices have Bluetooth turned on in the Mode area, are visible
and within close range.
2. Tap Devices > Add new device… Wait a few moments while
your device searches for Bluetooth devices.
3. Tap the name of the other Bluetooth device and tap Next. For
enhanced security, use passcodes. Enter the same passcode on
the other device.
4. Under Advanced, you can change the name of the other device
and add additional services, if available. Tap Save.
Creating a Bluetooth connection with a PC:
1. Ensure that your PC has connectivity software installed and has
Bluetooth hardware.
2. Set up a partnership between your device and the PC. Refer to
your PC documentation for instructions.
3. Once shown, select the PC from the Device list and tap Next.
4. Enter the passcode, if necessary and tap Next.
5. Confirm that ActiveSync service is available and place a check in
the check box and tap Finish.
6. Tap > ActiveSync > Menu > Connect via Bluetooth.
Bluetooth-enabled headphone: You can use Bluetooth stereo
headphones (A2DP) or a Bluetooth headset (HFP/HSP). Any
Bluetooth audio device supporting the A2DP, HFP, or HSP profiles
should be compatible. Many Bluetooth headphones do not require a
passcode to pair with your device.
Troubleshooting Bluetooth connection problems: If your device
cannot find another Bluetooth device, confirm that the device is
within range (less than 30 feet / 10 meters) and no large objects
obstruct the path of other Bluetooth-enabled devices. Confirm that
the device is turned on and has been configured to be discoverable.