Product Manual

Juno T41

User Manual

Care of the touchscreen

Use only your finger, the T41 stylus or other stylus devices

specifically designed for use with capacitive touchscreens.

The use of ballpoint pens, nails or other sharp objects to operate the

touchscreen will scratch and/or damage the device. Keep the

touchscreen clean by gently wiping the display, using a soft,

dampened cloth with either clean water or glass cleaner. Use a

screen protector at all times, and change the screen protector

according to manufacturer recommendations.

Do not use abrasive cleaners directly on the display. Doing so may

void your warranty. Use the screen protectors included with the

device to keep the touchscreen clean and protected, following the

instructions provided on the screen protector package.

Mechanical shock

The device is designed to resist damage for drops up to 4 ft (1.22

meters). However, you should protect the display from impact,

pressure, or abrasive substances that can scratch it or crack it. The

device should not be dropped unnecessarily.

Environmental considerations

The device’s rugged design allows you to run your device in harsh

outdoor environments. Here are some considerations that will help

you get the most out of your device when working in very wet, hot or

cold conditions.

Water: This device is designed to IP65 (yellow units) or IP68 (grey

units). IPx5 is defined as resistant to driving rain and water spray.

IPx8 is defined as resistant to submersion in water up to 1 meter

deep for up to 2 hours.

WARNING: Removal of the back case screws could cause leakage

and will void your warranty.

NOTE: Although an optional accessory for the port cover is available

and the audio jack has a protective cover, these are not required to

maintain the seal against water. The covers are intended to keep

mud, sand and other materials from blocking these ports.