Product Manual

FOCUS 35 TOTAL STATION USER GUIDE
4 – Setup
60
Service Menu - External EDM Frequency Press N and O to scroll to Ext. EDM Frequency and
then press P.
EDM Frequency Press P to switch on the EDM Laser source with
modulated scale frequency.
Press N (ESC) to leave the menu.
EDM Frequency
C
WARNING – The unit in frequency calibration
mode produces visible Laser light emerging at
the centre of the telescope objective. The
Laser light conforms to Class 3R. Make sure to
do the external EDM frequency calibration
appropriate to all warnings and precautions at
Laser Safety, page 3.
Nominal frequency will be displayed.
Press P to leave the menu.
Service Menu - Ext. EDM Calibration Settings after external EDM calibration:
Press N or O to scroll to Ext.EDM Calibration and
press P.
C
WARNING – Both values for External EDM
Calibration influence the measured distance
directly! Therefore, they must have been
determined by means of an accurate external
calibration.
Screen Actions and Comments
Ext. EDM Frequency
System diagnose
Service Menu
USB Interface
Ext. EDM Calibration
Ext. EDM Frequency
Laser Class
3R
ESC
Ext. EDM Frequency
Laser Class
3R on!
f=400044548 Hz
Ext. EDM Calibration
Ext. EDM Frequency
Service Menu
System diagnose
Drive Mode