Product Manual

FOCUS 35 TOTAL STATION USER GUIDE
4 – Setup
50
Note – In Suspend Mode - menu shows Waiting (suspend) - instrument and telescope can be turned
by hand, whereas StepDrive motor system and Focus System are not usable
Status Power supply
Screen Actions and Comments
Instrument Status Menu - Suspend After Starting: If the instrument is inactive for longer
than 5 minutes it will go into Suspend Mode, see also
Suspend Mode, page 24 and Power Management,
page 95. The display will show Waiting (suspend).
The instrument will leave the Suspend Mode by
starting the field software at the instrument, a short
P key press or a z key press (single beep).
* - Indicates Suspend Mode
Screen Actions and Comments
Instrument Status Menu - Waiting Symbol for battery (&) or external power (F)
supply.
Battery symbol with bars or x indicates battery
capacity:
– & - 75 to 100%
– $ - 50 to 75%
– ? - 25 to 50%
– ! - less then 25%
(below 10% ok will be changed to low)
– ( - no function possible
For more details and information about external
power supply select with a short O key press the
Power Supply Menu.
Power Supply - external source Menu shows the voltage of the source.
Leave the menu with P press.
Instrument Status
Waiting (suspend)
Radio channel: 3
Network ID:
$ *
3
Instrument Status
Waiting
Radio channel: 3
Network ID:
3
J $ =
Power Supply
Int.Bat. 6% low
>Ext. Bat. 12.4V ok