Product Manual

38
Base Mode See flowchart and explanations below.
When you access the Base Mode screen, the following
information is displayed:
• Status: Current receiver operating mode. It can currently
be used as a base (ON) or a rover (OFF).
• Reference Position: The type of position currently defining
the base location. This may be “Moving” or “Static”
(“Static” being the result of selecting either “Current” or
OK
OK
OK
OK
OK
OK
OK
OK
Base Mode
{Status: OFF or ON}
{Moving or Static}
Ref. Position
{Coordinates if “Static”,
otherwise just
“Moving” report ed}
Antenna
{Antenna model}
{Height value, V or S}
Base Settings
{Current Station ID}
{Port ID}
{Data format}
Base Mode
>OFF
ON
Position Type
{Current Setting}
OK
Antenna Name
{Current setting}
OK
Station ID
{Current setting}
OK
Station ID
{Set value}
Antenna Height
{Current setting}
Ref. Position
Last
Current
Set Ref. Position:
- Latitude
- Longitude
- Height
Position Type
- L1 phase center
- Survey point
- Antenna ref. point
OK
OK
Antenna Name
ASH 111661
Zephyr 3 Base
Zephyr 3 Rover
GA830 Marine
GNSS Choke Ring
SPGA Rover
OK
OK
OK
OK
OK
OK
Antenna Height
Set Height value
and type (V/S)
In progress
Please wait.
Output Data
{Port ID}
{Data Format}
If other antenna
added, will appear
at the top of the list
Set port Set data format