Product Manual

Installation Instructions

Receiver NOTE: Depending on how you install the receiver, you may

need to change the orientation of the displayed data on the

front panel screen. This is possible using one of the options

in the Display Settings menu (see page 35).

Tripod Mount

In land surveying applications, for example when used as a

roaming base mounted on a tripod, the SP90m can be

secured on one of the legs of the tripod using the lug ([A])

fastened on its bottom side (see illustration below).

The lug may be secured onto the receiver case in two different

ways allowing the receiver to be installed either with its front

panel upwards ([1]) or sideways ([2]) (recommended).

Bottom Plane Mount

This type of installation is suitable for machine guidance or

marine applications. The SP90m is secured from underneath

the receiver case, using four screws M4.

Preparing the support on which the receiver will be mounted

only consists of drilling four holes, forming a simple,

[1]

[A]

[2]

100 mm