Product Manual
4 Using wireless networks
4. If prompted, choose whether you want to share with other computers and devices on
the network. Select No if you are connecting to a network in a public place like a café.
You can check your connection by opening the browser and connecting to the Internet;
tap , and select All Apps / Internet Explorer. Some wireless networks may require you
to enter a password in a browser window.
Disconnecting from a Wi-Fi network
1.
Tap the Wireless network icon in the bottom-right corner of the screen.
2. Select the network that has a Connected status.
3. Tap Disconnect.
Forgetting a Wi-Fi network
If you do not want your device to automatically connect to a saved Wi-Fi network, you can
forget that network.
To forget a wireless network so it no longer appears in your list of networks:
1.
Tap / Settings.
2. Select Network and Internet / Wi-Fi / Manage known networks.
3. In the list of networks that appears under, tap the network you want to remove, and
tap Forget.
Working with mobile broadband
The Ranger 7 data collector has an integrated cellular modem enabling you to connect to a
mobile broadband network. The Ranger 7 data collector supports Worldwide LTE (where
available), and is compatible with AT&T- and Verizon-certified 3G and 4G networks.
Before you can send and receive data over mobile broadband, you must have a
MicroSIMcard in the device (see Inserting SDand SIM cards, page 26). You must then turn
on Cellular data on theRanger 7 data collector and configure the connection.
Connecting to mobile broadband
1.
Tap the Wireless network icon in the bottom-right corner of the screen. If it isn't
showing, swipe in from the right side of the screen to open the Action Center.
2.
Tap Cellular to turn it on, then tap-hold it and tap Go to Settings. (Or, tap / Settings /
Network and Internet / Cellular.)
Spectra Precision Ranger 7 Data Collector User Guide | 57