Product Manual

2 Basic setup and operation
1.
Tap , scroll down and expand Windows System, then tap Control Panel.
NOTE – In Tablet mode, tap then tap the All Applications icon to show the list of
applications.
2. In Category view, select Hardware and Sound, or Ease of Access.
3. Tap Built-in Keyboard or one of the subcategories in blue to open the settings applet
to a specific page.
The Built-in Keyboard utility has four options:
l Sticky Keys, page 43
l Backlight, page 44
l Status Icons, page 44
l SYM Key, page 44
It also has an About page which shows the Built-in keypad utility version, the version of the
keypad's firmware, and the identifier for the type of built-in keypad installed.
To use the utility:
l Select the option you want to configure settings for by tapping it. Details for the options
are covered below.
l Click Apply or Ok to commit any changes to the settings. Ok also closes the utility.
l To close the utility without committing the last uncommitted changes, click Cancel
button.
Sticky Keys
To enable Sticky Keys behavior if it has been turned off, select Turn on Sticky Keys. The
options here are:
l Include Windows key as sticky key. Because the Windows key is used as a non-
modifier key to open the Windows Start menu, you can make it non-sticky by
deselecting Include Windows key as sticky key. The Windows key as a sticky key is
disabled by default.
l Lock Modifier keys when pressed twice in a row. You can set a modifier key to be
locked down indefinitely by setting Lock Modifier keys when pressed twice in a row;
when you then press a modifier key twice, it locks down until you press the key a third
time. This is deselected by default.
l Play a sound when modifier keys are pressed. Plays a sound when sticky keys are
locked down or releaseded. This is set by default.
Spectra Precision Ranger 7 Data Collector User Guide | 43