Product Manual
Table Of Contents
- Safety information
- Introduction
- Setting up the device
- Getting started: basic operation
- Using the integrated keyboard
- Using the Android operating system
- Using wireless networks
- Working with GNSS
- Using accessories and connecting to other devices
- Using the cameras
- Troubleshooting, downloading updates, and repair
which point the modifier key is released.
l On: Modifier keys are locked down when pressed twice in quick succession (press a third time
to release). Pressing and releasing a modifier key one time latches the modifier key state down
until another non-modifier key is pressed at which point the modifier key is released. Pressing
and releasing a modifier key two times in quick succession locks the modifier key state down
until it is pressed and released a third time.
l Play sounds when modifier keys are pressed. Plays a sound when sticky keys are locked down or
released to make it easier to determine the locked state of the modifier keys.
l Off (default): No sound when sticky keys are pressed or released.
l On: Play a sound when a modifier key is latched down, locked down, or sticky keys are pressed
or released.
Keyboard status LEDs
There are 8 LEDs on the keyboard, including five Modifier / Sticky key LEDs. The Sticky key LEDs
represent the sticky state of the Modifier key it is located above.
Spectra Geospatial Ranger 5 Data Collector User Guide | 49
Using the integrated keyboard