Product Manual
Table Of Contents
- Safety information
- Introduction
- Setting up the device
- Getting started: basic operation
- Using the integrated keyboard
- Using the Android operating system
- Using wireless networks
- Working with GNSS
- Using accessories and connecting to other devices
- Using the cameras
- Troubleshooting, downloading updates, and repair
1.
If the device is on, turn it off; press-hold
the Power key, then tap Power Off.
2.
Using the Philips screwdriver, loosen the 4
screws to remove the cover from the back
of the device.
3.
Pry open the MicroSIM card door using a
coin or the tool located on the stylus tether
as shown; do not remove the door
completely.
4.
Slide the microSIM card into the slot in the
orientation shown on the microSIMdoor.
5.
Close the microSIMdoor, making sure it
clicks shut.
6.
Replace the cover and tighten the 4 screws
using the Philips screwdriver.
Spectra Geospatial Ranger 5 Data Collector User Guide | 27
Setting up the device