Product Manual

5. Attach the I/O Dust cover (optional)

While the unit is completely sealed, the dust

cover protects the connectors from foreign

objects.

6. Apply the screen protector

To keep the touchscreen clean and protected,

apply the screen protector following the

instructions provided in the screen protector

package. Unprotected screens become scratched and scuffed over

time. Screen protectors extend the life of the display by providing a

protective and replaceable barrier between abrasive grit and the

surface of the display. It is recommended to replace the screen

protector every 2 months, or more often if heavily used.

Screen damage associated with not using a screen protector, not

using the approved screen protector or failure to follow the

instructions for installation may void the product warranty.

7. Charge the battery

The power supply that ships with your unit has four international

plugs that fit almost every electrical outlet in the world. Connect the

appropriate plug to the power cord and attach to the power supply.

Plug into an electrical outlet and plug the barrel end of the power

supply into the unit.

Warning! Be sure to only use the power supply included with your

unit. Use of other adapters may void the product warranty.

8. Turning your unit on and off (resume/suspend)

The unit should boot up when the battery is installed. If not, press

and release the green Power key on the keypad. To turn your unit

off, press and release the Power key again.

One of the most convenient features of your unit is

“suspend/resume”. There is no waiting for the unit to boot up every

time it is turned on. (It does not occur on the first boot-up.)

IMPORTANT: Fully charge the battery at least 4 hours after

installing in the unit. The battery LED (left LED) will turn

green when fully charged.