Product Manual

30
9. Close the plastic regulatory label.
10. Place the battery into the unit.
11. Turn the latch located above the battery clockwise.
12. Replace the hand strap.
Setting up the cellular data connection using CellStart
(Optional on certain device offerings; may not be installed.)
1. Tap
/ CellStart
. (You may need to tap
OK
to agree to the
terms to open the program.) Under
Available Settings
, tap the
[+]
by your country to expand carriers.
2. Tap the
[+]
by the carrier you have signed up with and
highlight
Typical
and tap
New
.
(
If using multiple configuration
settings, you can tap on the primary setting and tap
Default
.)
3. Ensure the phone is turned on. Tap
/ Settings /
Connections / Wireless Manager / Phone.
4. Test the settings by tapping
/ Internet Explorer
and then
browse to a web page. The phone will automatically start
dialing when you try to open a web page.
5. If the phone will not connect, try other settings before calling
the carrier technical support.
6. You can also manually change modem settings by tapping
/
Settings / Connections
/
Connections
.
NOTE: Once connected, G (GPRS) or E (EDGE - a faster form of
GPRS) or H (HSDPA) will automatically appear in the notification
bar depending on the network capabilities in that area; some service
providers may only provide GPRS.
Removing cellular data settings
1. Tap
/ CellStart
.
2. Tap
Refresh
to see the current list of configurations.
3. Select the configured data setting you wish to remove.
4. Tap
Remove
and
OK
.
NOTE
: After removing a default configuration, the top setting
will become the new default.
To access the detailed settings for each configuration, tap
Menu
/
Open Connections Applet
to change the modem connections.