Item Brochure

Road Layout
Survey Pro uses road alignment data
dened in the Survey Pro job le or
directly from a LandXML le. Key in and
modify road layout information, then stake
the road in the eld. Survey Pro makes
dening a simple or complex road quick
and easy by providing easy to follow
menus that take you through the road
denition and editing process.
Road Stakeout
The road staking capabilities enable you to
stake any part and even locate catch points.
Once your road has been uploaded or keyed
in, Survey Pro provides a comprehensive set
of road stakeout tools and graphical views,
depending upon which element of the road
you are staking out. Quickly edit and view
the road denition in the eld using the road
editor. Points can also be staked out to a
predened subgrade offset, depending upon
the phase of the job you are working on.
Slope Staking
Simply dene a direction to use for the
slope to extend, and dene the desired
slope to stake. Survey Pro displays all
shots on a vertical realtime map display so
you can see the prole, and quickly locate
and stake the catch point.
SURVEY STANDARD
is a complete
data collection package for surveyors. It
contains a complete COGO suite as well as
traverse, sideshot and staking routines.
SURVEY PRO shares all Survey
Standard functions and adds advanced
road layout routines, advanced staking
routines, attribute collection, DTM routines
and much more.
SURVEY PRO GNSS shares nearly all
the Survey Pro functions, and it provides
the capability to collect data from RTK
GNSS receivers at centimeter-level
accuracy. Survey Pro GNSS software
is easy to use, reduces training and
simplies setups. It provides meaningful
error messages if anything goes wrong.
All staking functions are supported in the
GNSS module too.
SURVEY PRO ROBOTICS shares all
Survey Pro functions, works with all major
brands of robotic total stations, and adds
graphical staking screens.
SURVEY PRO MAX
is the ultimate
eld software. It integrates Survey Pro
Robotics and Survey Pro GNSS functions,
enabling you to use the same job les with
both GNSS receivers and total stations.