Product Manual

78
coarse or dirty cloth or hard paper. Spectra Geospatial
recommends that you use anti-static lens paper, a cotton wad,
or a lens brush.
Getting Rid of Moisture
If the instrument has been used in damp weather, take the
instrument indoors and remove the instrument from the
instrument case. Leave the instrument to dry naturally. If
condensation forms on the lenses, allow the moisture to
evaporate naturally. Leave the carrying case open until all
moisture has evaporated.
Storage
• Storage temperature range -40 °C to +70 °C (-40 °F to
158 °F) in a dry environment.
• Remove battery from the instrument before storage.
Tr an s po r t Always transport the instrument in a locked instrument case.
For longer trips, transport the instrument in the instrument
case and inside the original shipping container.
Always remove the internal battery during transport.
When transporting batteries, make sure to follow national and
international rules and regulations. Contact your transport
company before shipping.
Servicing Note - There are no user-serviceable parts on the
instrument.
Spectra Geospatial recommends that you take the instrument
to an authorized Spectra Geospatial service workshop for
service and calibration every 2 years. This is to guarantee that
the specified accuracies are maintained.
When you send the instrument to a service center, clearly
write the name of the sender and the receiver on the
instrument case. If repairs are required, enclose a note in the
instrument case. The note should clearly describe any fault or
symptoms, and indicate that servicing is required.