Product Manual

74
Press the Trigger key for 1 second to turn on the instrument.
The instrument will also turn on if you connect a 12 V power
supply and data communication cable to the foot connector.
Note - During startup the Trigger key LED will flash once
every second.
On Mode
In the On mode, the Trigger key LED will be on solid, the face 2
display will be on.
To turn off the instrument, press the Trigger key for
3seconds.
The instrument will go to off mode if the battery is very low
(battery capacity less than 2%).
If not used for 300 seconds (5 min), the instrument will go to
Suspend mode.
Suspend Mode
In the Suspend mode, the Trigger key LED will flash once every
other second, the face 2 display will be on.
To turn the instrument on, press the Trigger key for 1 second
or turn on the instrument from a remote application.
To turn the instrument off, press the Trigger key for
3seconds.
In Suspend mode the instrument will turn off automatically at
suspend time out. The suspend time out is set in the Spectra
Geospatial data collector field software.
Instrument with a Spectra Geospatial Data
Collector Connected
Off Mode
In the Off mode, the Trigger key LED and face 2 display is off.
To turn the instrument on press the Trigger key for 1 second.
The instrument will also turn on if you connect a 12 V power
supply and data communication cable to the foot connector.
Note - During startup the Trigger key LED will flash once
every second.
On Mode
In the On mode, the Trigger key LED will be on solid, the face 2
display will be on. The face 2 display will be controlled by the
Spectra Geospatial data collector field software. To turn off