Product Manual
Table Of Contents
- Safety Information
- Introduction
- Getting Started
- Set up
- Setup
- Starting the Instrument
- Leveling
- Instrument Setup
- The Laser Pointer
- Measuring the Instrument Height
- Adjusting the Optical Plummet
- Pre Measurement Check List
- Connecting a Data Collector
- Instrument Technology
- Care & Maintenance
- Appendix
73
Focus Servo
The instrument is equipped with a focus servo. The focus
motion knob is on the side of the instrument for easy access.
The focus knob is connected to a servo motor that is
integrated in the telescope. When you turn the focus motion
knob, the servo motor adjusts the focusing lens.
Power
Management
The power management in the instrument can set the
instrument to one of three different modes.
•Off mode
•On mode
• Suspend mode
Stand Alone
Instrument only, no Spectra Geospatial data collector
connected.
Off Mode
In the off mode the Trigger key LED and face 2 display is off.
Focus motion knob