Product Manual
Table Of Contents
- Safety Information
- Introduction
- Getting Started
- Set up
- Setup
- Starting the Instrument
- Leveling
- Instrument Setup
- The Laser Pointer
- Measuring the Instrument Height
- Adjusting the Optical Plummet
- Pre Measurement Check List
- Connecting a Data Collector
- Instrument Technology
- Care & Maintenance
- Appendix
69
Autolock
Technology
The instrument is equipped with Autolock technology, which is
used for a robotic or a conventional measurement with
Autolock.
Autolock technology controls the instrument servos and aims
the instrument correctly towards the target.
B TIP – To assure maximum performance from the Autolock
technology keep the lens clean and dry.
The instrument can lock onto and track a prism.
Aiming
The adjustment between the two optical axes, the telescope
and the tracker, may differ. The difference will make it seem
like the instrument does not point towards the center of the
prism, when using Autolock. This is not a problem since the