Product Manual
Table Of Contents
- Safety Information
- Introduction
- Getting Started
- Set up
- Setup
- Starting the Instrument
- Leveling
- Instrument Setup
- The Laser Pointer
- Measuring the Instrument Height
- Adjusting the Optical Plummet
- Pre Measurement Check List
- Connecting a Data Collector
- Instrument Technology
- Care & Maintenance
- Appendix
54
2. To correct the vertical position of the laser spot, insert the
Allen key into the access hole for the vertical adjustment
screw and turn it.
3. To correct the horizontal position of the laser spot, insert
the Allen key into the horizontal adjustment port and turn it.
Access hole
for vertical
adjustment
Access hole
for horizontal
adjustment
Clockwise = Down
Counter clockwise = Up