Product Manual
Table Of Contents
- Safety Information
- Introduction
- Getting Started
- Set up
- Setup
- Starting the Instrument
- Leveling
- Instrument Setup
- The Laser Pointer
- Measuring the Instrument Height
- Adjusting the Optical Plummet
- Pre Measurement Check List
- Connecting a Data Collector
- Instrument Technology
- Care & Maintenance
- Appendix
52
3. Press C to set the language.
Exit Menu
1. To exit the Setup menu press A to scroll to Exit (to
level) and then press C. The electronic level appears.
Note - If the instrument is left idle for more than 300
seconds (5 minutes) during any of the above routines, then
the instrument goes to suspend mode.
The Laser Pointer The FOCUS 50 total stations uses a red laser only as a laser
pointer. The laser pointer is coaxial with the line of sight of the
telescope. If the instrument is well adjusted, the red laser
pointer coincides with the line of sight. External influences
such as shock or large temperature fluctuations can displace
the red laser pointer relative to the line of sight.
- Setup -
>>
Reference HA
Adjustments
Firmware version
Select language
C
- Language Menu -
Language: ENG
cancel next set
Service info
C
- Setup -
>>
1:250
Setup
Exit
Radio settings
Reference HA
Bluetooth settings
Exit (to level)
Security