Product Manual
Table Of Contents
- Safety Information
- Introduction
- Getting Started
- Set up
- Setup
- Starting the Instrument
- Leveling
- Instrument Setup
- The Laser Pointer
- Measuring the Instrument Height
- Adjusting the Optical Plummet
- Pre Measurement Check List
- Connecting a Data Collector
- Instrument Technology
- Care & Maintenance
- Appendix
37
4. If you want to cancel Press A to select Cancel and then
press C to return to the setup menu.
Note - By default, the Bluetooth device is turned off. Any
change to this setting becomes the default setting until it
is changed again.
Note - To reduce power consumption and extend operation
time, Spectra Geospatial recommends that the Bluetooth
device is switched off when not in use.
Reference HA
Depending on the application software to support this
function.
Adjustments Menu
The adjustments menu contains all the instrument
collimation and calibration routines.
•Press A to scroll to Adjustments and then press C.
C
Bluetooth dev. is on
Set mode: on
next
set
>>
- Setup -
>>
Radio settings
Reference HA
Bluetooth settings
Exit (to level)
Security
-Adjustments-
Tracker collim.
HA/VA collimation
Compensator calib.
Laser pointer
Back...
>>
C
- Setup -
>>
Radio settings
Reference HA
Bluetooth settings
Adjustments
Security