Product Manual
Table Of Contents
- Safety Information
- Introduction
- Getting Started
- Set up
- Setup
- Starting the Instrument
- Leveling
- Instrument Setup
- The Laser Pointer
- Measuring the Instrument Height
- Adjusting the Optical Plummet
- Pre Measurement Check List
- Connecting a Data Collector
- Instrument Technology
- Care & Maintenance
- Appendix
35
5. If you want to cancel Press A to select Cancel and then
press C to return to the Radio Settings menu.
6. To return to the Setup menu Press A to scroll to Back
and then press C.
Bluetooth Device Settings
To establish Bluetooth® wireless technology communication
between a Spectra Geospatial data collector and the
instrument, first enable the Bluetooth wireless technology
option in the instrument. This is carried out as follows.
Note - Bluetooth wireless technology is not available on the
Autolock model.
C CAUTION - Before starting the Bluetooth device, make sure
that the regulations of the country that you are working in
allows the use of Bluetooth wireless technology.
Set network ID
Network ID: 115
C
next
set
>>
Storing radio
parameters
-Radio settings-
Set radio channel
Set network ID
Back...
>>